AC Schnitzer Exhaust Tip in stock now

[mysticm3]

In stock finally, to fit E46 6 cyl models stainless chrome exhaust tip FIgure 8 design, not even available from dealers. Laser engraved ACS logo, OEM quality.

Price for Evotehnik forum members 119 inc UK P&P.

http://img.photobucket.com/albums/v475/teddyhsu/ACexhaustip1.jpg
http://img.photobucket.com/albums/v475/teddyhsu/ACexhaustip2.jpg

The original exhaust tip needs to be cut off and the new one welded on. I think they could also fit other models but I haven't tried.

[Ali_]

It really does look very good teddy... nice work there mate.

[rossi46]

any pictures of the tips already fitted on the car?

[Ali_]

Ill offer to have it fitted to my 4pot haha but im way to tight for cash at the moment... birthdays, engagements, new roof lol when it rains it pours :o

[mysticm3]

sorry guys a bit more information here for you. Just been told by the supplier to make this tip fit 6 cyl models you will need to get an adaptor or modify the back box to fit because it only has one inlet at the back.

Fitted picture will be similar to this:

http://img.photobucket.com/albums/v475/teddyhsu/ssdddiffuser.jpg

[mysticm3]

and this

http://www.acschnitzer.com/modelle/modelle_img/sonderkonzepte/ACS_V8Topster_02.jpg

[Afif]

looking quite nice there :D

[mysticm3]

RRP 129 plus P&P, Evotechnik member 105 inc UK P&P. WOW! 2 left in stock be quick. Traditional ACS 'Oval' design also available to order.

These are OEM ACS quality.

[mysticm3]

There is also one available for Hartge lovers :)

http://img.photobucket.com/albums/v475/teddyhsu/SANY0514.jpg

See the traditional ACs oval design above it?

[BlackBimmerUK]

Hartge hummm:)

Now if I had seen that 4 weeks ago I would of bought one :(

[Black Neo]

will fit E46 4 cyl models or not?

[Ali_]

Great question.... :D

[mysticm3]

yes can you see the single inlet that fits 4 cyl models perfectly. 1 left in stock now.

[Har5ha]

How much is the AMG one?

Would it fit a c200 kompressor..if so...does it have to be welded on?

[mysticm3]

AMG ones are the same price 129 not sure whether it fits C200k what year is the car? I am no Merc expert....if you can give me the bore size I'll ask the factory and see if they have one to fit...

shoulda blurred da AMS tips...this is da BMW forum...LOL jk ;)

[mysticm3]

hmm just tested it on a facelift 318ci and the tip didn't fit. The tip has a 53mm inlet pipe which fits pre-valvetronic cars with 1.9 engine. Valvetronic 2.0 318 (like Big Fas) has a 60mm tip and this is too small for it. :(

[Black Neo]

so can you make it fit by any other way??

[mysticm3]

it can be adapted to fit any car therefore professional installation is highly recommended. You need a good exhaust specialist to do the welding for you.

[Two_Stripes]

Do think it looks very nice - a lot more modern.

[mysticm3]

my next shipment will include some twin inlet ones to fit 6 cyl models :D

[Two_Stripes]

S**t!!! I really want one of these.

I have a '97 325 TDS SE which has a 53mm pipe which bends down (not necessarily a problem) but right where the bend starts theres two exhaust hangers so couldn't cut the pipe to bolt one of these on as there's not enough straight pipe.

Have an m3 bumper with twin cutout to fill, oh well guess it'll be £300+ for a rear box!

[mysticm3]

I will have few more figure 8 tips for 6 cyl cars very soon. will post the inlet tip diameter up when I receive them.

[westside]

if i didn't have a super sprint back box i woul dhave got the hartge one for real!

[Two_Stripes]

Yeah would definately have been adding one to my order today if it hadn't been for those bloody exhaust hangers. Still contemplating getting the angle grinder and welder out!!!

[Ali_]

I havent installed it yet but in the flesh the tips look awesome.... nice and bling bling... prrrr :D

[Two_Stripes]

Teddy

Do still want one of these tips and am trying to figure out how I can fit it, what size inlet bore diameters to you have?

[DDX]

Teddy, can your factory get these cayenne figure 8 tailpipes:

http://www.germancarfans.com/tuners/7040818.001/7040818.001.1M.jpg

[mysticm3]

don't think there is any, but let me check

[mysticm3]

two stripes, the exhaust tips are actually universal and fitting usually requires cutting and welding. The new one needs to be welded on, the tips on your old backbox needs to be cut off, and sometimes a bridging tube needs to be made also. Sounds complicated but really any decent exhaust fitting garage should be able to fit it for you in about 45 minutes.

[Two_Stripes]

Cheers Teddy - will look into it, guess it would be better to buy a new exhaust and have it welded to that rather than an old one?

[mysticm3]

really depends on what you want, I'd say go for a new exhaust. If you want Eisenmann one give me a shout.

[Sid]

Can you see the "ACS" logo clearly, or does some of it come under the bumper/diffuser?

I'm interested Teddy... whats the score with the latest price please dude?
You can PM if you like

Are there any other ACS tips around too?
:)

[MEGA]

HOLY CRAP 4 year old thread dude :p

[mysticm3]

ha ha

what you see in the picture is the actual product. I dont keep them in stock now though..will send you a pm

[Robtaylor]

will they fit straight onto the stock m3 tail pipes ? also how far would they stick out from the diffuser ?

rob

[mysticm3]

they would not fit straight onto M3 tips...you need to cut and weld to make sure they sit at the right angle.

[Sid]

HOLY CRAP 4 year old thread dude :p
I know, didn't see the point in making a new thread!

A lesson for noobs... this is how you use the search function! lol :p